Jebao Jecod DCP 2500 Return Pump with Controller

Jebao Jecod DCP 2500 Return Pump with Controller

The Jebao Jecod DCP 2500 is a high-performance return pump witha controller which operates proffessionably and reliably. The simple speed control and operation of the Jebao Jecod DCP 2500 is reinforced by innovative electrics that provide around 65% energy savings. The maximum flow rate of the 23 watt DCP 2500 is up to 2500 litres per hour.

With an 8 speed controller and a slightly increased pump head compared to previous models, the DCP 2500 delivers an ultra-quiet performance and can be used in marine and saltwater environments. 

Courtesy of its ability to electronically detect error conditions, the device communicates visual warnings and utilises an automatic power off protection, to prevent damage to the motor if the rotor becomes blocked. The feed mode disables the pump for a total of 10 minutes

The Jebao Jecod DCP 2500 contains no copper elements and is reinforced with a resistant ceramic shaft to provide long life and corrosion resistance. The Jebao Jecod DCP 2500 pump is designed to be ultra-quiet for submerged pump applications.

At a Glance:

Maximum flow rate of up to 2,500 litres/hour - adjustable from 600 - 2,000 litres per hour

High performance motor with innovative electronics resulting in power savings up to 65%

Ultra quiet

Electronic detection of no water enables automatic power off protection

Motor protection if the rotor is blocked

Can be used in Marine and Freshwater applications

No copper elements

Long operation life is achieved by the use of wear resistant ceramic shaft

Soft start operation - pump gradually builds up to set flow rate

Feed mode disables pump for 10 minutes

8 speed settings (30% - 100%) for DC1200/2500 - the setting is retained if power is lost

Dimensions: L131 x W73 x H121

.